Knowledge base 188: AC-3300 (Solo2) card format compatibility
Question:
What card formats can I use with the AC-3300 (solo2)?
Answer:
The AC-3300 (solo2) simply reads a 26-bit number and stores it in
its memory. When reading a card to open a door, it compares the 26-bits
read in against the 26-bit numbers stored in memory, so it does not matter
whether it is a CSN number or formatted as H10301, with any site code.
Related Articles
Knowledge Base 230: Ordering replacement Master Card for Standalone Products
This knowledge base article explains the process required for ordering a replacement Master Card for the Controlsoft All-In-One and Solo range of Standalone products. The Master Card is programmed with the device's serial number. You can find this on ...
Knowledge base 226: H10304 Card Format Overview
This article shows the HID 37-bit H10304 card format breakdown so you can add the format into your access control system. Description Facility Code Card Number Parity 37-bit Tracked Format. Wiegand Format with customer-defined facility code. 16 bits ...
Knowledge base 138: Identity Access 9 - Sigma series with a Wiegand In reader
This feature requires an IA-PRO license if you do not have an IA-PRO license please contact sales@controlsoft.com The following KB describes the 3 ways of configuring a Sigma series biometric reader with a Wiegand in reader for either 1) Wiegand IN ...
Knowledge base 134: SSL error solution EDGE EVO solo
Sometimes there can be an error when accessing the Edge Evo Solo via a web browser which refers to an SSL Error. Please follow the relevant steps below depending on your browser type. Internet Explorer 1. Left-click the gear icon: 2. Select ...
Knowledge base 86: Using Morpho Readers as Standalone Readers
When using Morpho readers such as the J-Series, Sigma, Sigma Lite or Sigma Lite Plus in standalone mode to control a door, we recommend using a timer relay between the reader and the lock. This makes the system more resilient and protects the ...