Knowledge base 214: MorphoKit requires a LIBFOTF license to enumerate slap devices but the license was not found.
IDEMIA BioBridge Integration with MorphoWave Compact XP/SP
Editing or enrolling a user via BioBridge produces the following LIBFOFT License not found error :
The name of a MorphoWave Compact must be entered int othe "Contractless Finger biometric device" and if applicable to the site in "Smartcard Encoding"
see Administration, Clients, Contactless Enrollment.
This should then resolve the missing license error.
Related Articles
Knowledge base 154: Using MorphoWave Compact MDPI reader with HID SEOS Cards (PACS Data only).
This bulletin explains how to read the physical access control number (PACS) from HID SEOS Cards on the MorphoWave compact MDPI reader. If you wish to encode biometrics to a SEOS card please contact support@controlsoft.com to discuss. Equipment ...Knowledge base 89: Using MorphoManager BioBridge with Paxton
Introduction BioBridge is an enrollment and synchronization middleware that overlays enrollment and demographic synchronization between MorphoManager and third-party data sources. The infrastructure is extensible and supports interfacing to multiple ...Knowledge base 90: Using MorphoManager BioBridge & Identity Access 8
1. First install Identity Access (IA), follow the Installation Guide available with the download or IA USB Stick. 2. Next log into Identity Access to do this run the IA User Interface – Windows Start Button > All Programs/All Apps> Controlsoft ...Knowledge base 186: IDEMIA Morpho Readers with Identity Access 9
This document will cover how to set up an IDEMIA biometric reader using direct integration in Identity Access. Requirements An IDEMIA Biometric reader (Sigma Wide, Sigma Lite, Sigma Lite + or Sigma Extreme) PC running Identity Access (IA) with a ...Knowledge base 150: Using MorphoManager for Contactless (MorphoWave Compact) fingerprint encoding to smart cards.
This bulletin explains how to use the Morpho Wave series reader for 2 factor (card + bio) or 3 factor (card + bio+ pin). Equipment required - MorphoManager 14.6.0 (or newer) MorphoWave Compact reader (Firmware 1.2.2 or newer) Morpho MSO 300/1300 ...