Knowledge base 222. Setting a Static IP address to the Identity Access PC

Knowledge base 222. Setting a Static IP address to the Identity Access PC

In some cases it may be required to connect an iNet controller to a PC without any network infrastructure.

To make this possible the iNet controller can be reset to an IP Address of 10.0.1.230 by holding the reset button for 30 seconds. The PC also needs to be in the same IP Network range.

1. On the Identity Access PC, in the Windows search bar type "Control Panel". Select the Control Panel app.


2. In the top right hand corner, ensure "View by" has "Large Icons" checked. Select "Network and Sharing Centre".


3. Select "Change adapter settings" on the left hand pane


4. Right click on "Ethernet" and select "Properties"


5. Scroll down and select "Internet Protocol Version 4 (TCP/IPv4)", then select "Properties".


6. Select "Use the Following IP Address". For the "IP address" type in "10.0.1.200". For the "Subnet mask" type in "255.255.255.0". The Default Gateway, Preferred DNS and Alternate DNS settings can remain blank.


7. Click OK and close all other menus. You can now continue to Step 6 of the Identity Access Express Commissioning Guide.

    • Related Articles

    • Knowledge base 90: Using MorphoManager BioBridge & Identity Access 8

      1.    First install Identity Access (IA), follow the Installation Guide available with the download or IA USB Stick. 2.    Next log into Identity Access to do this run the IA User Interface – Windows Start Button > All Programs/All Apps> Controlsoft ...

    • Knowledge base 201: Moving Identity Access

      Checking your Identity Access License When moving Identity Access from one machine to another it is important to check if the current Identity Access server has a Professional or Enterprise license and what version the software is currently running. ...

    • Knowledge base 181: HID Asure ID Software with Identity Access 9

      Controlsoft Identity Access 9 install includes a copy of HID Asure ID® 7. This is an ideal choice for organizations looking for affordable and easy-to-use photo ID card software with direct integration with the Controlsoft Identity Access database. ...

    • Knowledge base 103: Moving Identity Access Professional license to a new PC

      If Identity Access (v2016.3 or later) includes an IA-PRO or Enterprise license, it is possible to transfer the license to the new PC as described below Run the Licensing Utility on BOTH machines: Select Start > All Programs > Controlsoft > Identity ...

    • Knowledge base 160: Changing the IP address of Sigma series reader

      Open your web browser and type in the IP address of your Morpho Reader into the URL bar. You may see a message that says 'site is not secure'. Depending on browser, you will need to click advanced or details in order to proceed. Once the webpage ...